How Much Does it Cost to Install Artificial Grass? The average installation area for artificial grass is about 12″ x 24″. However, larger or more specific jobs can usually be performed on either larger or smaller pieces as per the need of the job or location. Artificial grass installation in commercial areas like sports facilities or industrial yards is generally larger and more complicated than residential installations. For residential homes, smaller lawn areas may be suitable for standard-sized artificial grass. But larger lawn areas with thick vegetation, pathways, driveways, and other features may require custom-made artificial grass systems.
Why Would I Need A Commercial Artificial Grass System?
Commercial artificial installation processes have a few key components. The primary component is the digging of a sizable “base” layer of crushed rock (also known as “base soil”) to establish a firm, even surface to which the artificial grass system will be installed. The depth of the “base” layer, in addition to its width and height, will depend on many factors, including the size and shape of the area to be treated, the particular applications of the turf, and the types of the surface beneath it. Additional steps involved in the commercial artificial installation process include grading, clearing the area, and applying an appropriate top dressing if needed.
Are There Alternatives To “Crisp Rock”?
Yes, there are. In-situ artificial grass installation utilizes the natural characteristics of the earth’s surface to create a smooth, even surface that is durable and attractive. This process imitates the natural topography of the earth. While it requires additional excavation, the finished turf will often be less expensive than the crumbled rock artificial grass lawn.
How Do I Make Sure The Project Planner Is Right For Me?
One of the most important parts of an artificial turf installation is the soil used to prepare for the installation. You want to make sure the local weather is conducive to growing an attractive lawn. If you’re installing over concrete, it’s important to make sure the soil you use will take the weight of the new synthetic turf. For that reason, the soil is pre-treated with a borate-based solution to make it more rigid and waterproof. For smaller installations over a treated lumber base, the turf may be laid directly over the lumber. To avoid cracking and other issues associated with laying directly on top of the wood, you can opt to sub-base the installation.
Sub-base installation involves removing the existing sod and then spreading a heavy-duty plastic sheet to reinforce the sod. Over time, the plastic will break down and become lightweight enough to pack into the small spaces between the newly installed synthetic grass rows. While this may seem like a fine idea, it can cause problems. If you install your grass over a sub-base, the grass could take years to develop fully. For homeowners that want to install their lawn right away, this might not be a problem.
Make Sure The Ground Is Prepared
Before you can lay the synthetic grass, however, you need to make sure the ground is prepared for its installation. This means making sure the top layer of soil is fine and even. Then, make sure your homeowner’s association rules allow for a trenching permit. A trenching permit is only required if the grass will be installed in a trench or if the homeowner has requested a permit in the past.
The artificial grass installation process also requires you to perform some inspections to determine the health of the lawn. An inspection should be conducted every three to four months to check for damaged, bald, or dying grass. It is important to note that these conditions may vary depending upon the type of lawn installation you have. Performing the annual inspection and addressing any issues before they become severe can help you avoid replacing your grass sooner.